ATOES CEQ (Complete) | Ame Group Website

CRANE & EQUIPMENT

With the Experience, Support from Manufacturer and Trained Personnel, AquaTerra is able to Provide the Advanced Technology Products & Software Solutions that Improve Communication & Overall Safety Awareness for Lifting from Boom to Above Hook.

Crane Block (380 Series)

API 2C SYSTEMS

Block systems for offshore pedestal-mounted cranes certified to API 2C are considered critical components. The Crosby Group provides McKissick blocks, overhaul balls, sheaves, button spelter sockets, and wedge sockets that meet the compound requirements of API 2C to required Cv values.

Material traceability, chemistry reports, tensile test reports, magnetic particle inspection per ASTM E-709 on the following components:

All 380 Blocks are furnished standard with roller bearings.
Blocks through 25 short Tons use 319N style hooks with S-4320 latches.
All sizes are RFID equipped.

Hook Blocks

Charpy impact test reports per API 2C latest revision on the following components:

All Easy Reeve® Blocks are furnished standard with roller bearings.
Blocks through 25 short Tons use 319N hooks with S-4320 latches.
All sizes are RFID equipped.

Easy Reeve® Hook Blocks

Overhaul Ball

Load Links

Radiolink Plus

Capable of weighing and dynamic load monitoring in capacities from 1t to 500t.
Constructed of lightweight, aerospace grade aluminum.
Environmentally sealed to IP67 or NEMA6.
Proprietary 2.4 GHz wireless.
Update rate of 3Hz and can be easily configured to run at industry-leading speeds of up to 200Hz.
Remote on/off from handheld display or software.
ATEX Zones 0, 1 & 2 available.
Design validated by FEA.
2-year warranty.
DNV-GL Type Approval.
Complies with ASME B30.26.
Bluetooth option is available and is supplied with a free HHP app for iOS and Android.

Wirelink Plus

Available in capacities ranging from 1 to 300 metric tons.
The non-indicating version of Crosby SP’s popular Radiolink Plus and Loadlink Plus digital dynamometer tension loadcells.
Designed for use with Crosby SP’s Handheld Plus digital display, desktop controller PC software (DCP10M) or other form of instrumentation.
Multiple output options to include mV/V, analog out, ASCII, MODBUS RTU, and CAN-BUS.
A standard analog output option is available to include: 3 wire 0-10v, 3 wire 0-5v, 4 wire +/-10v, 3 wire 4-20mA, 2 wire 4-20mA.
Constructed of lightweight, aerospace grade aluminum.
Available with IP68 environmental protection.
supplied with a 10-meter cable as standard, however, usable cable length varies greatly with lengths available to 1,500 meters depending on output format.
Options for subsea use available.
2-year warranty.
DNV-GL Type Approval.
Complies with ASME B30.26.

Loadlink Plus

Capacity from 1t to 300t.
Unmatched weight-to-strength ratio.
30% lighter than competing dynamometers with the same safety rating.
Large high resolution 25mm or 1 in LCD display.
Features full function push button controls for tare, choice of units (lbs, kg, kN, and metric tons), peak hold, preset tare, audible set-point alarm, and an overload counter.
The highest standard resolution of any digital dynamometer on the market today (5000+ divisions).
100Hz peak hold.
RS-485 serial output.
2-year warranty.
DNV-GL Type Approval.
Design validated by FEA.
Complies with ASME B30.26.

SubseaLink

Manufactured for use in subsea or submersible projects.
On board data-logging option.
Pressure tested to depth of 2000m/6562ft.
SubConn connector.
Environmental protection IP68/NEMA6P.
Output options include mV/V to the Crosby SP Handheld Plus, 4-20mA or 0-10v analog to a PLC, data-logger or The Multi Operation Survey System (MOSS), RS485 or an integral data-logger storing up to one million readings and powered by an internal battery.
Constructed from 17-4PH stainless steel.
Designed to fit with The Crosby Group ROV shackles.
Option for ROV mounting on the SL body itself.

BlueLink

Designed to replace outdated mechanical products still in the field, this 14,300lb (6500kg) dynamometer, the BlueLink, is the latest Crosby Straightpoint product to feature proprietary Bluetooth wireless technology.
The Bluetooth signal effortlessly connects to any iOS or Android smartphone that has our free HHP app installed, providing the operator with a wireless range of up to 328ft or 100m. This allows them to stand in a safe position from the load with no requirement to read a load on the loadcell itself. The app also allows the operator to log data versus time, or on events such as over- or under-load. An adjustable alarm will alert the operator on their smartphone if any overload is occurring.
Rigged using industry standard Crosby G2130 Shackles, the BlueLink has been designed to minimise headroom (6.14 in or 156mm from eye to eye). With a design factor of over 500%, its compact lightweight design does not sacrifice on strength. environments.
The BlueLink is powered by four standard AA alkaline batteries that provide in excess of 500 hours transmission time. Its internal antenna ensures safe transmissions of loads to an accuracy of ±0.2% FS.

Towcell - Bluetooth version

The Crosby Straighpoint Towcell® is a 25kN wireless loadcell, specifically engineered for the emergency services, salvage, and 4x4 industries. The Towcell allows for increased safety and the avoidance of costly overloads by providing real- time monitoring of tensile towing forces during recovery, clearance and salvage efforts. The Towcell is rugged, lightweight, compact, and can be installed, with ease, onto any tow bar, whether it’s a standard 52mm or 2 in ball or pin assembly and is ready to use in seconds.

Unique design fits any standard 2-inch tow hitch.
Unmatched battery life of 500 hrs.
Waterproof IP67 or NEMA6.
Internal antenna.
Compact size and lightweight.
Proprietary 2.4 GHz wireless communication.
Design validated by FEA.
Bluetooth enabled and is supplied with a free HHP app for iOS and Android

ChainSafe

Designed to work with 10mm chain.
Unmatched weight-to-strength ratio.
Update rate of 1Hz and the Bluetooth signal effortlessly connects to any iOS or Android smartphone that has our free HHP App that will alert the operator on their smartphone if any overload is occurring.
Bluetooth wireless range of 100m/328ft.
No battery change required.
Battery life 5 yrs based on 4 hrs use per day.
Environmentally sealed to IP67/NEMA6.
Internal antenna.
Conforms to EN1677:2008.
Fatigue tested to 30,000 cycles to 1.5x WLL.

Shackle Load Cell

Wireless Loadshackle

Capacities of 3.25t to 500t, as well as being obtainable up to 3000t.
Wireless range of 1000m or 3280ft.
Every Loadshackle is proof tested.
Electronics housed in hard anodised enclosure.
Environmentally sealed to IP67 or NEMA6.
Battery life of 1200 hrs from 4 x AA batteries.
Internal antenna.
Remote on/off from handheld display or software.
Supplied with a load-centering bobbin.
2-year warranty.
Complies with ASME B30.26.
Design validated by FEA.
ATEX Zones 0, 1 & 2 available.
Bluetooth option is available and is supplied with a free HHP App for iOS and Android.

Cabled Loadshackle

Capacities of 3.25t to 400t, as well as being obtainable up to 3000t.
Compact size, low headroom, lightweight.
Every Loadshackle is proof tested.
Utilizes the same advanced microprocessor based electronics as Crosby SP products.
Unrivaled resolution.
Push button tare.
Environmentally sealed to IP67 or NEMA6.
Peak hold.
Advanced options available for subsea applications.
Manufactured using Crosby 2130 Carbon and 2140 Alloy Bolt Type Anchor industry leading shackles.
Configured with output formats to include mV/V, RS-422, RS-485, utilising the ASCII, MODBUS RTU, and CAN-BUS protocols or supplied with integral amplifier allowing analog outputs such as 4-20mA, 0-10v, 0-5v etc.
mv/v or analog signal options.
Design validated by FEA.

Compression Load Cells

Wireless Compression Load Cell

Wireless range of 1000m or 3280ft.
High grade 17-4PH stainless steel, providing excellent strength and corrosion resistance.
Proprietary 2.4 GHz wireless.
Accuracy of ±0.1% FS.
Environmentally sealed to IP67 or NEMA6.
Stocked capacities up to 1000t.
Industry leading wireless range up to 1000m or 3280ft.
Internal antenna.
ATEX & IECEx version for hazardous area zones 0, 1 & 2 available.
Battery life of 1200 hrs.
Compact size.
Remote on/off from handheld display or software.
Design validated by FEA.
Bluetooth option is available and is supplied with a free HHP App for iOS and Android.

Wired Compression Load Cell

Ranges from 5te to 1000te.
High grade stainless steel, offering excellent strength and anti-corrosion properties.
Can be supplied with optional loadcaps.
Utilises the same advanced microprocessor based electronics as Crosby SP products.
High sampling rates, extreme resistance to industrial level noise and unprecedented stability.
The highest standard resolution of any self-indicating compression loadcell on the market today (5000+ divisions).
Environmentally sealed to IP67 or NEMA6.
Optional analog outputs.
Lightweight, compact size.
10m or 30ft cable supplied as standard (other lengths available).
Custom versions available.
Design validated by FEA.

Loadblock Plus

The highest standard resolution of any self- indicating compression loadcell on the market today (5000+ divisions).
Low capacity, self-indicating compression loadcell.
Large 25mm or 1 in LCD display.
100Hz peak hold.
Compact size.
Push button tare.
Preset tare.
Peak hold.
RS485 port for connection to data-logging system allowing remote viewing.
Audible set-point alarm and an overload counter.
Selectable units te, lbs, kN, kg.

Tension Meter

Bolt On Line Tensionmeter (BOLT)

Constructed from aerospace-grade aluminum.
Designed to be mounted in a permanent position on wire rope or cable to accurately monitor measurements of tension up to 20,000lb or 10.000 kg and up to 1.25 in or 32mm diameter.
Proprietary 2.4 GHz wireless.
Leading wireless range of 1000m/3280ft when connected to SW-HHP, enabling you to read up to four loadcells simultaneously.
Unlimited range when connected to BaseStation to monitor remotely.
Will provide reduced site visits, improve decision making and safely monitor line tensions from any distance from anywhere in the world.
Unrivaled battery life of 1200 hrs.
Multiple drop tested from 3 meters or 10 feet.
Internal antenna.
Remote on/off from handheld display or software.

Running Line Dynamometer

Fully constructed from corrosion-resistant stainless steel.
Large range of capacities to 150t and wire rope diameters up to 89mm or 3½ in.
Measures tension force at speeds up to 20m/min or 65ft/min.
Five-wheel design, improving accuracy.
Industry leading battery life of 1200 hrs (wireless).
Maintenance-free heavy duty bushes.
Options for lineout and speed available.
Software available to data log and monitor or analog outputs.
Cabled system or wireless bluetooth option are available and is supplied with a free HHP app for iOS and Android.
IP67 or NEMA6 Loadpin.
Design validated by FEA.

Clamp On Line Tensionmeter (COLT)

Lightweight wire rope tension meter for fast and accurate measurement of tensions up to 11,000lb or 5000 kg and up to 1 in or 25mm diameter.
Constructed from aerospace grade aluminum.
Unlimited wire rope calibration database via Android or iOS app.
Built-in magnetic smart device holder for on board display.
Main swivel joints fitted with high-quality bearings.
Lever ratio of 5.3:1 allows effortless, safe, clamping onto pre-tensioned wire ropes.
Wireless Bluetooth 4.2 enabling operator to stand a safe distance away, up to 100 m or 328 ft.
Quick intuitive adjustable center sheave makes changing wire rope sizes fast and easy.
No easily broken external antenna.
High waterproof resistant design IP67 or NEMA6 for all weather use.
Long battery life of 1000 hrs operational time.
As the library of wire rope diameters and constructions is increased each app user will benefit when they update free of charge.

CableSafe

Simple to use and set up.
Remote monitoring using smart phone via Bluetooth.
Rapid tension force measurement - Up to 600m or 1968ft per minute.
Able to be used in all weather and air quality conditions.
Providing up to 500 hours battery life.
Easy to install and replace batteries (4 x AA standard alkaline).
Fully constructed from light and durable hard anodised aluminum.
Five-wheel design, improving accuracy.
Clear anodised.
Linchpins are fitted to the top sheave pins, making wire rope installation quick and simple.
Maintenance free heavy duty needle bearings.
Compatible with a wide range of synthetic rope/electrical cable diameters – 4-30mm or 5/32 in – 1 3/16 in.
IP67 ingress protection or NEMA6 – heavy protection against dust and rain.
Design validated by FEA.

Loadpin

Standard & Custom Build Loadpin

Designed for use in applications where an end of line loadcell cannot be used, meaning an integrated solution is required.
High tensile stainless steel.
Supplied complete with an anti-rotation plate as a cabled or wireless solution.
Built to withstand the harshest environments in industries such as marine and offshore oil and gas.
Suitable for use in exposed situations and can also be supplied to withstand immersion in seawater at extreme depths.
Supplied with a 10 meter or 32ft cable as standard, however, usable cable length varies greatly with lengths available to 1500 meters or 4900ft, depending on output format.
Include mV/V, RS-422, RS-485, utilising the ASCII, MODBUS RTU and CAN-BUS protocols or an analog output such as 4-20mA for PLC integration.
Design validated by FEA.

Crane Scale

Miniweigher Plus

Compact size and lightweight.
Capacities from 100kg to 5t.
Large 25mm or 1 in LCD display.
High accuracy.
Selectable Units te, lbs, kN, kg.
Highest resolution of any compact digital crane scale on the market.
Peak hold.
Preset tare.
Overload counter.
90dB audible set point alarm.
RS-485 serial output.
Corrosion-resistant finish.

Accessories

Handheld Plus

Displays up to 4 loadcells simultaneously.
Wireless range 1000m or 3280ft (ATEX 500m or 1640ft).
Low battery warning.
Signal strength warning.
Overload counter.
User settable 90db audible overload alarm.
Multiple display units (metric tons, lbs, kg, kN).
200Hz peak hold.

Wireless Overload Alarm Module

This wireless relay module features audio and visual warning indicators. The set point of the unit can be triggered from a single or summed group of up to four Crosby SP wireless loadcells. It contains two relays (NO and NC). NO is for audio and visual indications, while NC is a spare and can be used to control 230V AC / 30VDC 5A systems.

Wireless Scoreboard Display

Wireless Base Station with Analog Output

This 100mm or 4” scoreboard LED display is wireless and operates between 110-240V AC. The numerals are viewable for up to 45m or 150ft, making it perfect for installation on a crane gantry. The SW-SD displays an individual load in metric tons or summed load of up to four Crosby Straightpoint wireless devices.

The SW-BS provides a configurable analog output for any single and maximum (up to 4 loadcells) Crosby Straightpoint wireless loadcell and is ideal for integration to a PC, PLC and other data acquisition. Housed in a IP65 enclosure, the output can be selected from current 4-20mA, 2 relay outputs, RS485 ASCII (Configurable) plus an optional CANbus 2.0A or 2.0B output.

Loadcell Transmitter

Wall or Cab Mount Bracket

The SA700C transmitter connects to strain gauge transducers such as loadcells, torque sensors and pressure transducers allowing them to form part of a Crosby Straightpoint wireless system. Load data from the SA700C can be received by multiple receivers that include SW-HHP handheld, INSIGHT software or Crosby SP’s range of wireless accessories.

Constructed from stainless steel and fitted with a viewing angle adjusting mechanism, the SU3282 bracket fits either the HHP or SW-HHP handheld displays. Ideal for wall or cab mounting, leaving the operators to work safely and hands-free.

External Amplifier

The SA-3420 external amplifier allows the operator to convert the output of any of the SP cabled loadcell products into a three wire 4-20mA analog output. The weatherproof enclosure is fitted with stainless steel glands and is suitable for connection to a PLC, data logger, or other instrumentation.

Handheld Rubber Boot

Drop tested to one meter at –30°C, this 70SHA rubber boot is purpose molded to fit and protect the HHP and SW-HHP handheld display against impact, especially when it is used in the harshest industrial environments.

Software and Systems

LoadConnect Software

INSIGHT Datalogging & Center of Gravity Software

Crosby Straightpoint LoadConnect, connected to BaseStation, is a cloud-based solution to monitor loads and line tensions from any distance and from anywhere in the world. Stay connected, protect assets, reduce site visits, and improve safety.

Dashboard overview.
Live load data.
Error reporting.
Productivity and utilisation graphs.
Regular email reporting.
SMS alerts.
Connect to BOLT to monitor tension on cables.
Connect to SP loadcells to monitor loads.

INSIGHT software, supplied with an SW-D USB wireless dongle, allows connection of up to 126 Crosby Straightpoint wireless loadcells simultaneously onto any Windows tablet or laptop.

Insight has four main features:

Multi-channel display and data logging mode

View and log load data from connected loadcells plus totals loads live on screen and directly into a .csv file for later analysis at speeds of up to 200Hz.

Visualisation mode

For complicated lifts import a photo of the lift and drag and drop loadcell displays – make the screen look like the lift.

Center of gravity mode

Connect to Crosby SP’s range of wireless compression loadcells and use this feature to weigh and calculate the center of gravity of large items and structures.

Proof load testing

Real time graphing of load test and auto generated test certificates.

HHP App

Connect up to four loadcells simultaneously.
View in eight different languages.
Overload screen flash.
Set different overload alarms for each loadcell.
Productivity report.
Up to 100m or 328ft remote monitoring distance.
Multiple weight unit measurement options (kN, metric tons, kg, lbs).
Peak hold button.
Measurement reporting.
Export measurement report.
Zero and gross monitoring options.
User defined resolution setup.

BlokCam

BlokCam is a crane camera system specifically designed to aid a crane operator to visually see the loads attached below the hook or boom from any crane cab.

The sound and view from below the camera is transmitted and received wirelessly via the antenna systems to a screen in the cab. This allows the operator to see and hear the load and surroundings, giving an unobstructed, live, audio-visual feed of the critical areas that working in the blind would never allow.

X3L Camera System for Tower Crane

M3L Camera System for Mobile & Telescopic Cranes

The S5 is a 113° wide angle lens. The low profile design, tool free operation and rotatable lens allows for easy installation on any side of the hook block including in between the cheek plates.

T3 dramatically improves the most important aspects of the BlokCam. The combination of performance, specification, aesthetics and 71mm low profile design make this a must for all crane operations.

B6 is a non-hazardous 14.54v Battery Pack. The clever tool-free design and easy grip finger slots make it easy to install, remove and charge.

Depending on the crane type and required installation the Repeater is mounted on the jib, boom tip or cab. The Repeater has been specifically designed for fast, wireless, telescopic deployment.

The purpose built Processor can project multiple high definition images and audio’s through a single HDMI lead with less than 0.2 seconds of latency. The design of the Processor accomodates multivoltage AC and DC inputs making your BlokCam system compatible across all types of cranes. The Processor also provides power to the monitor, eliminating the need for a secondary socket or power supply.

HD Monitor is a 10.1 inch 16:9 LCD monitor with built in speakers and a HDMI input. It has a 1280 x 800 pixel panel with automatic brightness control.

B6-CH3 is a 4-cell Li-Ion battery charger. It has 3 step charge control with current detection as charge termination. Input voltage 90-264 VAC LED Charge Indicator (Orange – Fast charge, Yellow – Top-off charge, Green – Charged).

The M3 is an all in one display that combines a monitor, repeater and processor in to a purpose built fast fit system.

The M3 has a HD display with built in speakers, automatic brightness control, less than 0.2 seconds of latency and multivoltage AC and DC inputs.

BlokAlert

BlokAlert is a wireless, audio-visual warning system that can be quickly and easily deployed to the hook block of a crane.

When activated by the lifting crew, the BlokAlert receiver gives out a recognisable audio-visual signal that can be seen and heard by site personnel in proximity to the hook block or load.

This forewarns the workforce to the position and movements of the hook block, increases awareness and reduces the risk of being struck by the crane’s hook block, lifting accessories or load.

HOW BLOKALERT WORKS

1a The lifting crew/rigger

The handheld fob is activated by the riggers or lifting crew. When operated, the signal is transmitted to the receiver on the hook block of the crane.

and/or

1b In the operator’s cab

The transmitter is activated by a footswitch in the crane cab. When operated, the signal is transmitted to the receiver on the hook block of the crane.

2 On the hook block

On receipt of a signal from a transmitter, the Receiver is activated, alerting the workforce to the proximity of the hook block

BLOKALERT FOB – 4 BUTTON (60009)

The BlokAlert Fob allows the riggers to operate multiple BlokAlert systems across your site.

BLOKALERT TRANSMITTER (BA-T2)

The Footswitch provides the hands-free operation of the BlokAlert Transmitter. It is quick and easy to install.

BLOKALERT RECEIVER (BA-R1)

Along with the LED Beacon, the BlokAlert Receiver is capable of up to 528 different audible warnings. This audio-visual warning system, combined with great functionality, performance and design make this a must for all lifting operations.

BLOKALERT TRANSMITTER (BA-T2)