Built to Lead .
Engineered to Last
WIRE ROPE RIGGING
With the Experience, Support from Manufacturer and Trained Personnel, AquaTerra is able to Provide the Advanced Technology Products & Software Solutions that Improve Communication & Overall Safety Awareness for Lifting from Boom to Above Hook.
AME 203 Citrus Renovator
AME 206 Safety Solvent Renovator
AME Rust Cleaner Series
AME 331 Rapid Rust Cleaner
AME 318 Non-Fuming Rust Cleaner & Converter
AME Non-Flammable Lubricant Series
AME 500 Non-flammable Lubricant
AME Multi-Purpose Lubricant Series
AME 555 Multi-Purpose Lubricant
Derrick Block
Tower/Derrick Hoist Blocks
-
New design provides the dependability of standard McKissick® Snatch Blocks, along with features that make it perfect for the challenging needs of Tugger Hoist and Tower Erection applications.
-
Fully recessed sideplate design eliminates gap between sheave rim and sideplate, providing failsafe capture of the sheave in the case of center pin overloading.
-
Sealed tapered roller bearings extend the life of the center pin and bearings, and allows for faster line speeds than recommended with standard snatch blocks.
-
Holes through side plates are available for secondary block securement device.
Suitable for hoisting personnel, contingent upon all employees, including the winch operator, being trained to follow applicable Federal, local and industry standards.
-
Tugger/Derrick applications: API RP54
-
Tower applications: OSHA directive CPL 2-1.36
Mckissick Snatch Block - Shackles
L-170
L-160
417
421
419
431
435
Mckissick Snatch Block - Hook
416
L-170
L-160
C-720
420
418
430
434
Mckissick Snatch Block - Tail Board
404
L-170
L-160
402
406
407
401
Mckissick Snatch Block - Double Sheave
408 With hook
409 With Shackle
Lead Block & Flag Block
Horizontal Lead Blocks
S-600S / G-600S
-
Available painted or galvanised.
-
Fitted with steel sheaves.
-
Self-lubricated Bronze Bushed
Vertical Lead Blocks
S-601S / G-601S
Flag Blocks
S-602S / G-602S
Hinged Lead Blocks
S-603S / G-603S
-
Available painted or galvanised.
-
Fitted with steel sheaves.
-
Self-lubricated Bronze Bushed
-
Base plates are drilled.
-
Available painted or galvanised.
-
Fitted with steel sheaves.
-
Self-lubricated Bronze Bushed.
-
Base plates are not drilled.
-
Available painted or galvanised.
-
Self-lubricated Bronze Bearings
Type of End Termination
Open Spelter Socket
Close Spelter Socket
Mooring Socket
Wedge Socket
Open Swage Socket
Close Swage Socket
Wire Rope Clip
Flemish Splice
Turn Back Eye
Wire Rope Lubricant
Vitalife®
Vitalife® products are the preferred wire rope lubricants in the industry because of their ability to penetrate into wire rope and displace water and contaminants, thus reducing wear and corrosion throughout the rope.
-
Available in a variety of container sizes.
-
Provides inner strand preservation and lubricity.
-
Allows for easy visual inspection of the ropes.
-
Reduces the friction between the strands of the wire rope, thus extending rope life.
-
Adheres to surface of strands, forming an outer film which provides excellent corrosive protection.
-
Non-tacky (will not attract dust)
-
Vitalife® in aerosol form is a regulated dangerous good
-
Vitalife® Bio-Lube has been developed especially for environmentally friendly applications.
-
Vitalife® 500 has been developed exclusively for ski lifts and tramways.
VITALIFE® 400
12 OZ.
VITALIFE® 410 BIO-LUBE
12 OZ.
VITALIFE® 400
5 GALLON
VITALIFE® 400
55 GALLON
Crimpers & Cutters
JET-LUBE WLD™
Lewis LSG Snake Grips
Lewis LSG-X Snake Grips
Other Brands
Wire Rope & Accessories
CORRECT NOMINAL DIAMETER MEASURING
Ref: API 9A Test on Rope for Diameter
Nominal Diameter
Diameter measurements shall be taken on a straight portion of rope, either under no tension or a tension not exceeding 5 % of the minimum breaking force, at two positions spaced at least 1 m apart.
At each position, two measurements, at right angles, of the circumscribed circle diameter shall be taken.
The measuring equipment shall extend over at least two adjacent strands.
The average of these four measurements shall be the measured diameter.
Correct
Wrong
WIRE ROPE COMPONENTS
Wire Rope Strand Construction
Direction & Type of Rope Lay
Right Ordinary Lay (Sz)
Right Lang Lay (zZ)
Right Alternate Lay (aZ)
Left Ordinary Lay (Zs)
Left Lang Lay (sS)
Left Alternate Lay (aS)
WIRE ROPE CLASS & CONSTRUCTION TABLE
WIRE ROPE CORE TYPE
Fiber Core (FC)
Polypropylene or Natural Fibres are used as the Core. Excellent Flexibility and Lubricant Retention
Wire Strand Core (WSC)
A Single Strand is Used as the Core.
Simple & Cost Effective. Suitable for Small Diameter Wire Rope
Independent Wire Rope Core (IWRC)
A Small Wire Rope is Used as the Core. Excellent Crush & Distortion Resistance with Longer Fatigue Life, and Higher Breaking Strength
WIRE ROPE TENSILE STRENGTH GRADES
Crane & Equipment
Crane Hydraulic
Operating Environment
Safe Crew Transfer
Cargo Handling
Wire Rope Rigging
Chain Rigging
Synthetic Rigging