top of page

DATA CENTER SOLUTION

From Infrastructure, Power Cord, Access Management & Thermal Management, Aqua-Terra offers a wide range of solution to our Data Center Customer.

  • Full Chain, One-Stop Overall Solution

  • Cold Plate Liquid Cooling Data Centre Infrastructure Solutions C7000

  • Closed Aisle System

  • Data Centre Solutions

  • Immersion Liquid Cooling Data Centre Infrastructure Solutions C8000

  • Data Centre Liquid Cooling Monitoring and Management System

image.png

Molded Power Cords

Custom Made in the USA

Bus and Electrical Drops

Safely power your data cabinet or industrial equipment

image.png
image.png

Colors & Length:

image.png

USA Molds

C14 Straight: 18, 16, 14 AWG

C14 Right: 18, 16, 14 AWG

C14 Left: 18, 16, 14 AWG

C19 Straight: 16, 14, 12 AWG

C19 Right: 16, 14, 12 AWG

C19 Left: 16, 14, 12 AWG

C20 Straight: 16, 14, 12 AWG

C20 Right: 16, 14, 12 AWG

C20 Left: 16, 14, 12 AWG

C5 Straight: 18 AWG

C5 Right: 18 AWG

C5 Left: 18 AWG

C13 Straight: 18, 16, 14 AWG

C13 Right: 18, 16, 14 AWG

C13 Left: 18, 16, 14 AWG

C15 Straight: 18, 16, 14 AWG

C15 Right: 18, 16, 14 AWG

C15 Left: 18, 16, 14 AWG

5-15 Straight: 18, 16, 14 AWG

5-20 Straight: 16, 14, 12 AWG

L5-20 Straight: 18, 16, 14, 12 AWG

6-15 Straight: 18, 16, 14, 12 AWG

6-20 Straight: 18, 16, 14, 12 AWG

L6-20 Straight: 18, 16, 14, 12 AWG

Above molds can be applied to over 4,000 different cords in-stock.

Bus Drop

image.png

NEMA Twist Lock

Strain Relief

image.png

Box wire grip

Electrical Drop

image.png

Mounting Options

Termination

image.png

Ultrasonic Weld

image.png

Russellstoll®

image.png

Bus drop grip

image.png

NEMA Duplex

image.png

Ferrules

IEC60309 Pin & Sleeve

​to connect Data Center or Industrial Equipment

image.png

Hubbell / ABB / PCE / Mennekes:

image.png

[3 Wire]

100-130 Volt 4h clock position Yellow 220-250 Volt 6h clock position Blue 480 Volt 7h clock position Red

550 Volt DC 8h clock position Black

image.png

[4 Wire]

125/250 Volt 12h clock position Orange 200-250 Volt 9h clock position Blue 380-415 Volt 6h clock position Red

480 Volt 7h clock position Red 600 Volt 5h clock position Black

image.png

[5 Wire]

120/208 Volt 9h clock position Blue 240/415 Volt 6h clock position Red 277/480 Volt 7h clock position Red 400 Volt DC 8h clock position Red 347/600 Volt 5h clock position Black

image.png

Amperages Available

16A, 20A, 30A, 32A, 60A, 63A, 100A, 125A

Online Custom Configuration

  • Design, price and place orders in Real-Time

  • Single ended power supply or device cords

  • Extension cords using SJTOW, SOOW or Type W cord jackets

  • Plug adapter pigtails between IEC60309, NEMA, and Non-NEMA standards

  • Plug, connector, receptacle, inlet and back box electrical parts to complete your installation

Country Power Cords

image.png
image.png

PDU Cable Whips

to safely power your Data Cabinet

image.png
image.png

Receptacle / Connector / Wire:

  • NEMA Twist Lock

  • Russellstoll

  • NEMA Straight Blade

  • Isolated Ground

  • IEC 60309 Pin & Sleeve

  • Hubbell (Non-NEMA)

  • IEC 60309 Receptacle

  • CA STD 50A Locking

UL Components:

  • Hubbell

  • KafTech / Anaconda

  • Russellstoll

  • Thomas & Betts

  • Raco Bell

  • ABB

Options:

  • Stranded or Solid THHN

  • Custom Labelling

  • Multiple Circuits per Conduit

  • Receptacles Inline

  • Packaging Choices

  • Multiple Nippled Boxes

  • Box Mounting Hardware

  • Staggered Boxes

  • Strain Relief Grips

  • Zero Halogen

Conduit Stock Colors:

image.png

Custom Assembled

Indoor and Outdoor Power Cords

image.png
image.png
image.png
image.png

Length Tolerance: 1 -100 feet

image.png
image.png

Cord Types: SJT, SJTOW, STO, STOW, SOOW

Secure Sleeves

to ensure cords stay connected

image.png
image.png

Plug Options: Male

image.png

Connector Options: Female

Locking Cords

Z-LOCK

The Z-Lock universally compatible locking power cord locks into place on both sides, regardless of the brand of IT hardware or the manufacturer of PDU / plug strip.

image.png

W-LOCK

Use with any APC AP8000 series rack PDU to secure the C14 or C20 end to the power source. Secures the C13 or C19 female ends via an integrated spring loaded grip.

image.png

P-LOCK

Use with any ServerTech Lockable CDU, Raritan SecureLock PDU, or Emerson Knurr PDU to secure the C14 or C20 end to the power source.

image.png

IEC-LOCK

Use with Geist PDU Strips that have been configured with IEC Lock proprietary outlets to secure the C14 or C20 end. Secures the C13 or C19 female ends with a spring loaded grip.

image.png

V-LOCK

Use with any APC AP8000 series rack PDU to secure the C14 or C20 end to the power source. To lock the C13 or C19 connectors the inlets must have the corresponding V-Lock.

image.png

WS-LOCK

Use a Secure Sleeve to tighten the C14 or C20 ends. Secures the C13 or C19 female ends via an integrated grip that grabs the ground pin on any mating inlet.

image.png

DUAL-LOCK

Use with any ServerTech Lockable CDU, Raritan SecureLock PDU, or Emerson Knurr PDU to secure the C14 or C20 end to the power source. Secures C13 or C19 female ends via an integrated grip.

image.png

SECURE SLEEVES

Augment existing cord retention strength with Secure Sleeve C14 / C20 plug or C13 / C19 connector covers. 

Retrofit existing cords inexpensively.

image.png

In-Stock Products

World’s Largest Selection (In-Stock in USA Distribution Center)

image.png

4000+ Molded Cords & Adapters:

  • Cords in 10 colors – First to Market

  • Data Center IEC60320 Jumper Cable

  • NEMA/Twist Lock Power Supply Cords

  • Single Ended Power Supply Cords

  • IEC60309 Industrial Cords

  • International Power Cords

  • Plug Adapters – Block or Pigtail

  • Hospital Grade Power Cords

  • Splitter Cords Multi-Leg 2-5

  • Extension Cords – Multi-Tap

  • Shielded Cords for EMI/RFI

Data Center Parts:

  • Fiber Patch Cable

  • Cage Nuts

  • Rack Screws

Cord Security:

  • Secure Sleeves - C14 / C20 / C13 / C19

  • IEC Lock C13 / C19, Inlet C14 / C20

  • V Lock C13 / C19, Inlet C14 / C20 for APC

  • P Lock C14 / C20, Outlet C13 / C19 for

  • Servertech, Raritan and Emerson

  • S Lock C13 / C15 / C19 / C20

  • Dual-Lock C13 for Servertech, Raritan and Emerson

  • W Lock C13 / C14 / C19 / C20 for APC and Enlogic

  • Lock Outs – C13 / C19

Wiring Devices - International & USA:

  • Male Rewireable Plugs and Inlets

  • Female Rewireable Connectors

  • Receptacles, Outlets, and Socket

  • Wire Grips and Cord Connectors

Event Wiring Devices

image.png
image.png
image.png

Broadcast and Audio/Visual

image.png

Neutrik® has a commanding position in this market segment. PowerCON®, powerCON TRUE1, and powerCON 32 are circular quick-lock systems. Solutions range from 16-32 Amps.

 

The NEMA 5-15 AKA Edison Plug is also commonly used in broadcast and audio/visual. NEMA to powerCON adapters are available but are dependent on voltage requirements. Solutions range from 15-30 Amps.

Stage Productions

image.png

Bates® and Group 5® are stalwart names in Stage Pin wiring devices used primarily for stage lighting. Solutions range from 20-100 Amps.

 

NEMA illuminated Straight Blade and Locking wiring devices are used to ind electric sources when stages are dark. Solutions range from 15-20 Amps.

Expositions and Trade Shows

image.png

Wieland gesis® solutions are ideal for large-scale, quick connect power systems. European trade shows rely heavily on this technology. Solutions range from 16-20 Amps.

 

International and North American trade show power distribution systems use IEC 60309 Pin & Sleeve for higher amperage infrastructure. Solutions range from 16-125 Amps.

Outdoor Festivals and Fairs

image.png

Single Pole CAM Systems are typically the backbone for power distribution in outdoor environments. Solutions range from 150-400 Amps.

 

Branch feeds are often terminated with California Standard CS Twist-Lock systems. Solutions are 50 Amps.

Industrial Wiring Devices

image.png
image.png
image.png

Heavy Industrial applications including mining, energy, shipyards and welding

image.png

Russellstoll® MaxGard®

Solutions range from 30-400 Amp

Hubbell® UL1686

Solutions range from 30-200 Amp

Light Industrial applications including: data centers, food preparation, temporary power and marine

image.png

IEC-60309 ABB®, PCE® and Hubbell Solutions range from 16-125 Amp

Russellstoll DuraGard®  Solutions range from 20-60 Amp

Mechanical Interlocks required by NEC for separate disconnects within sight of all motor loads

image.png

Available for MaxGard, UL1686, IEC-60309, and DuraGard.

Applications requiring safe disconnects including: data centers and factory equipment

image.png

Hubbell Hubbellock®

Solutions range from 20-60 Amp

Applications requiring safe disconnects including: data centers and factory equipment

image.png

Hubbell Non-NEMA

Solutions range from 10-30 Amp

Applications requiring quick disconnects and speed without damaging equipment

image.png

Hubbell Midget

Solution is 15 Amp

North American Wiring Devices

North American wiring devices include male plugs, male inlets, female connectors, female receptacles and female outlets.

Residential

image.png

Edison type NEMA straight blade products dominate this space. Two-Wire or Three-Wire options ranging from 125 to 250 Volts are available. These devices accommodate basic power and white good appliances. Solutions range from 15-50 Amps.

Office

image.png

NEMA straight blade products dominate this space as well. Three-Wire or Four-Wire options ranging from 125 to 277 volts are available. These devices accommodate lighting systems and larger office equipment. Solutions range from 15-60 Amps.

Commercial Applications

image.png

NEMA Twist-Lock are used when requirements demand more wires, higher voltage or the security of locking power connections. This series was invented by Hubbell® and works well for countless applications including Data Centers. Solutions range from 15-30 Amps.

Outdoor Rated

image.png

NEMA Watertight solutions are rated for various Ingress Protection (IP) levels. While some systems are proprietary, most are now interoperable across brands. All the mating parts in a power distribution path must have compatible interlocking sealing glands to maintain IP rating. Solutions range from 15-30 Amps.

Marine Use

image.png

CA Standard 50 Amp Twist-Lock or IEC-60309 Pin & Sleeve wiring devices are used in robust outdoor installations or requirements that demand higher amperage. Solutions range from 15-125 Amps.

Hospital Grade

image.png

Standards have been defined in North America for the grade of wiring devices used in certain medical environments. Life-giving equipment power systems have higher standards applied to the manufacturing process. Look for the green dot that identifies Hospital Grade. Solutions range from 15-20 Amps.

Detachable Equipment

image.png

IEC-60320 C1-C22 interconnects are the typical interface for devices that don’t have hard-wired cords. An odd number denotes the female end of a cord (e.g., C13) that interfaces with an even-numbered male end in this cast (e.g., C14).

Hospital Grade Cords

image.png

HG Molded Options:

5-15 to C13 Locking Female

5-15 to C13

5-15 to C13 Up Angle

5-15 to C13 Down Angle

5-15 to C13 Right Angle

5-15 to C13 Left Angle

5-15 to C13 Clear Ends

5-15 to C13 Right Angle Clear Ends

5-15 to C13 Left Angle Clear Ends

5-15 Up Angle to C13 Clear Ends

5-15 Down Angle to C13 Clear Ends

5-15 Right Angle to C13 Clear Ends

5-15 Left Angle to C13 Clear Ends

5-15 Up Angle to C13

5-15 Down Angle to C13

5-15 Right Angle to C13

5-15 Left Angle to C13

5-15 to C13 Shielded

5-15 Up Angle to C13 Shielded

5-15 Down Angle to C13 Shielded

5-15 Right Angle to C13 Shielded

5-15 Left Angle to C13 Shielded

5-15 to 5-15 Extension

5-15 to C19

5-20 to C19

5-20 to C19 Shielded

5-20 Up Angle to C19

6-15 to C13

6-15 to C13 Shielded

6-15 Up Angle to C13

6-20 to C19

6-20 to C19 Shielded

6-20 Up Angle to C19

image.png

How is HG different?

The ground pin is heavier and stronger. Retention force for live and neutral is much greater.

 

A separate ring clamp inside the mold is present, which enhances the wire retention force.

 

Prong blades are solid brass construction, no folded material.

 

HG cords withstand tough conditions and are identified by a green dot.

Why is this important?

If a medical device used in patient care fails due to a NON-Hospital Grade cord you are legally exposed!

image.png

Available Colors:

image.png

Color Cords

image.png
image.png

Cable Lengths:

Stocked: 1 - 15 feet

Custom: 1 - 100 feet

image.png

Colored cords help distinguish power paths in high-density installations

Configurations:

image.png

Custom colors/shades also available

Angled Cords

image.png

NEMA Angled Configurations:

IEC Angled Configurations:

  • 1-15 Low Profile

  • 1-15 Polarized Down

  • 1-15 Up/Down

  • 14-30 Down

  • 14-50 Down

  • 15-30 Down

  • 15-50 Down

  • 5-15 Down

  • 5-15 Low Profile

  • 5-15 Right

  • 5-15 Up

  • 5-20 Down

  • 5-20 Up

  • 5-30 Down

  • 5-50 Down

  • 6-15 Down

  • 6-15 Up

  • 6-20 Down

  • 6-20 Up

  • 6-30 Down

  • 6-50 Down

  • C13 Down

  • C13 Left

  • C13 Right

  • C13 Up

  • C14 Left

  • C14 Right

  • C15 Left

  • C15 Right

  • C19 Left

  • C19 Right

  • C20 Left

  • C20 Right

  • C21 Left

  • C21 Right

  • C5 Left

  • C5 Right

  • C7 Left/Right

  • C7 Up/Down

image.png
image.png
image.png

Angled Left

image.png

Angled Right

Angled Down

Angled Up

Data Center Cords

image.png
image.png
image.png

Splitters Cords

image.png

Number of Legs

image.png

2 Legs

image.png
image.png

3 Legs

4 Legs

Selection of Male Input (Plugs)

image.png

Equal Legs on Output Side

image.png
image.png

Available Colors:

image.png
image.png

5 Legs

Selection of Female Output (Sockets)

image.png

Stagged Legs on Output Side

image.png
image.png

proxSafe Key Management Systems

maxx Series

Compact & Elegant with Automatic Door

image.png

Our compact proxSafe® key box maxx 6U with its space-saving, automatic roller shutter and elegant design guarantees an efficient key management for modern office environments.

 

The electronic key box with robust steel housing offers enough space for single keys, narrow key bunches or even larger key bunches. Several key boxes can be combined and expanded with each other and can be easily operated with only one central terminal. All 3U keyPanels of the flexx series can be installed in the key box.

 

Thanks to our maintenance-free, robust keyTags with integrated RFID chips, all keys are firmly anchored in the maxx key box via slot locking, are not visible through the roller shutter and are thus double protected against manipulation.

 

To remove the key, the roller shutter of the key box automatically raises and the slot of the selected key slot lights up red. After removal, the roller shutter closes automatically and stops automatically if a hand is under the roller shutter.

flexx Series

A Scalable Modular System

image.png

The flexx key cabinet is available in five different sizes that can be individually combined according to the modular principle. In this way, small, compact systems from 16 key slots, or even large key depots with space for several thousand keys can be put together.

 

The modular design offers maximum capacity in a small space and the possibility of adapting the system to the premises or expanding it at a later date.

 

The cabinets can be individually equipped with the desired, flexible slot modules, called keyPanels, and can be easily extended or exchanged at short notice if required.

 

Depending on the number and size of the key bundles, keyPanels are available with different slot densities. In addition, specific panels can be integrated for the controlled handover of ISO cards and radio devices.

 

To issue keys, the user identifies himself at the terminal, the door of the key depot can be opened and the key removed from the illuminated slot.

 

Due to the slot interlocks, all keys are double-secured and can only be removed with the corresponding authorisation, even when the door is open.

proxSafe Smart Storage

Locker

Lockers with Electronic Monitoring

The locker cabinet portfolio offers different compartment

sizes, which can be freely combined with one another to

create the desired system solution.

 

An RFID chip installed in or attached to the device allows the user to remove or return the device simply by placing it against a compatible reader with integrated antenna, the device is then automatically identified in the compartment.

 

An LED lights up to indicate successful removal/return .

 

If space is a premium it is possible to hang the RFID chip on the device.

 

When removing or returning a device, the user simply inserts the keyTag into a slot in the compartment. Inserting or removing the keyTag is electronically logged when the device is removed or returned.

image.png

flexx Series

Store , Charge and Manage

image.png

The flexx cabinet portfolio, with its different cabinet sizes,

offers space for various receptacles, e.g. charging stations

for radio equipment, which are individually adapted to the

corresponding device.

 

Different devices can also be stored and managed in the same cabinet.

 

Charging status displays can be integrated as required.

 

The devices can also be issued on a rotation basis, so that only the fully charged and not half-empty devices are issued.

radioPanel

image.png

bloxx Series

Modular Drawer System

The bloxx system is ideal for managing and storing e.g. vehicle keys and vehicle documents. bloxx is a modular

system that consists of modules and can be put together as desired.

 

There are different modules with, for example, 10 wide or 20 narrow drawers.

 

The drawers are optionally available with or without identification of the contents.

 

The bloxx system is operated via a 17 inch touch screen. In addition, other features such as cameras for capturing documents can be integrated. bloxx offers the freedom to use third-party PC and operating software at the customer‘s request.

 

The bloxx enclosures can be individually equipped with modules, which are available in different versions.

 

Depending on the size and quantity of the objects to be managed, the modules are available as drawers, lockers or as slot modules for key management. Integrated sensors guarantee maximum security and monitor all drawers, lockers and service doors.

 

Alarms can be generated in the event of unauthorised access.

 

Optionally, the drawers and lockers are available with RFID compartment monitoring or integrated USB charging function.

 

This way, the security level can be increased if required and the availability of electronic assets such as tablet PCs or smartphones can be guaranteed.

image.png

doorLoxx Digital Locking Systems

Online Reader

The New PRx 6 Reader Generation

Meet the new PRx 6 reader generation.

 

The new, timeless design provides a premium look whilst the proven deister reading performance ensures fast and smooth operation. In addition to the established reading technologies, Bluetooth® and NFC™ are supported as well.

 

For low light operation, the keypad is illuminated and the three LEDs clearly indicate the reader´s status to the user.

 

The access control readers are available in Cosmic Black and Astral Grey.

image.png

PRx 6 EU

KPx 6 EU

PRx 6 US

KPx 6 US

PRx 3 EU

KPx 3 EU

Offline Reader

A Modern Key Replacement

Using the doorLoxx® electronic locking system, transitioning from a conventional locking system with mechanical keys to a fully-fledged electronic access control system has become much easier and cost-effective. Installation is straightforward and doors are not damaged.

 

There is no need for complex wiring. The digital locking components are battery-operated and exchange data via airLink®.

 

The electronic locking components are available in different formats, e.g. as a cylinder or digital handle. The portfolio includes updaters, controllers and online readers that link the locking components to the system.

 

Full scalability allows both standalone operation of a system without PC software and the use of Commander Connect featuring all the performance characteristics of professional access control systems.

Digital Cylinder

The universal solution for every door

image.png

The digital cylinder is installed in precisely the same manner as a mechanical cylinder in just a few simple steps.

 

Each basic cylinder body type can be adapted to allow up to 16 different length combinations.

 

The base cylinder lengths are available in 5 different lengths as well as a half cylinder; it is possible to adapt lengths with the use of profiled spacers when installing.

 

That means it is possible to realize lengths from 30/30 to 45/75 in 5 mm steps using multiple profiled spacers.

Digital Handle

The all-rounder with different handle shapes

image.png

The slim and straightforward design of the Digital Handle ensures it will grace any door.

 

Four different models are available to choose from, depending on the form of the handle.

 

When during installation it is possible to make use of the same drilled holes which are used for conventional fittings.

 

The cover plate facilitates parallel usage of the existing cylinder to reliably lock the door or to elegantly cover the cylinder opening.

 

The exchangeable cover plate makes it possible to adapt

the installation to doors with different distances between the handle and cylinder.

Digital Locks

Security meets Design

image.png

The digital lock is developed for self-locking locks and combines security with an attractive minimalistic design.

 

It seamlessly integrates with the design of the door handle to maximize

freedom of shape and colour.

 

The digital lock offers more security because even if damaged

or forcefully removed there is no access to the mechanics of the locking mechanisms which are inside the door.

 

Upon request a traditional cylinder can also be installed to allow emergency

mechanical override.

 

This is then covered by an extended version of the read head which can

be removed to allow access to the key mechanical override with no compromise to security.

Digital Strike

Online and Offline Combined

image.png

The digital strike offers the same door control and door monitoring functionality as an online access control with all the benefits of an offline system.

 

It has two inputs and outputs that can control the door alarm or door contact.

 

It is powered by a local power supply and can be flush-mounted.

 

A card reader from the deister product family can be selected and is located on the outside of the door.

 

The connection to the access control system is carried out cost

effectively over deister Cardnet.

 

For online data communication, airLink can be used if required.

Oilfeild Equipment & Supplies

Lifting, Rigging & Mooring

Fluid Transfer & Connectors

HSE Equipment

Instrumention Process Control Products

MRO Consumables

Pipeline Application Products

Data Center Solutions

Crane & Equipment

Electrical & Wire Products

bottom of page