top of page

CARGO HANDLING

Backed by a diverse portfolio of trusted brands, an extensive product range, and a team of trained specialists, Oceanic Offshore delivers reliable, end-to-end solutions for all your below-the-hook lifting needs.

ATS ONLY.png

ATS Push Pull Pole

ATS SAFETY PUSH PULL POLE

image.png

RATED LOAD CAPACITY

Push Force > 2800N / Pull Force > 1650N

Available Length: 21”, 42”, 50” 72” & 90”

Push-pull operations are often carried out in production and life on land or offshore.

ATS high-strength insulated push-pull rods are mainly used in docks, mines, power, oil and gas energy and offshore petrochemical industries. Push the goods away from them, or pull the fishing nets and cables towards them.

  • ATS high strength insulated push-pull rod mainly includes

  • High-strength non-slip insulation rod;

  • D Shape or I shape comfortable insulated grips;

  • High-strength insulated push-pull Shape nylon tool head, you can choose nylon surface and rubber surface;

  • Anti-falling and non-slip hand guards are installed on the pole. During the push-pull operation, the operator can easily grasp and push and pull during the use, and protect the hands to prevent the falling objects from hurting the hand.

ATS Drum Lifter

ATS MORSE 86 VERTICAL DRUM LIFTER

image.png

Model 86 Made of Carbon Steel Painted Blue

  • Attach to crane, monorail or hoist

  • Set drum on bottom support

  • Secure web strap around drum

  • Lift steel, plastic or fiber drum

  • Capacity: 1000 Lb. (454 kg)

Lift and Transport Steel, Plastic or Fiber Drum:

22” to 23.5” (55.9 cm to 59.7 cm) diameter

23” to 38” (58.4 cm to 96.5 cm) tall

Accepts Diameter Adapters for smaller drum down to 14” (35.6 cm) diameter

Where is this drum lifter used?

Docks and mezzanines

Oil rigs and other marine applications

Construction sites

image.png
image.png

Muli-Purpose Offshore Bulk Lifter

image.png

The BPC Bulk Offshore Lifter is a multi-purpose lifting device designed specifically for safe handling of:

 

  1. Intermediate Bulk Containers (IBC)

  2. Flexible Intermediate Bulk Containers (FIBC)

  3. Palleted Loads

 

The unique design incorporates the concept of “full load containment” for both IBCs and FIBCs. The IBC design protects against potential lateral loading when transporting fluids in totes by having the lift frame swallow the load encapsulating the IBC tote. In FIBC Mode, the lifting frame is designed to allow usage of a simple cargo net that enables dropped object protection in the event FIBC bag handles were to break.

Product Highlights

  • Designed to ASME B30.20-2021 Design of Below the Hook Lifting Device

  • Working Load Limit (WLL) of 2,500kg

  • Designed to lift both 275-gallon and 330-gallon IBCs

  • Designed to lift 1,040-liter and 1,250-liter IBCs

  • Safely lifts all standard dimesons of common FIBC bags

  • Safely accommodates palleted materials in both 40”x48” and 48”x48” pallets

  • Lift frame supports eight 3T excavator weld-on hooks for vertical lift slings

  • Each pallet lift bar is designed for a 1,250kg WLL

  • Each assembly proof load tested to 125% of WLL at the factory

IBC 'Tote' Mode

FIBC Mode

image.png
image.png

Pallet Mode

image.png
image.png

Key Design Features

  • The upper lift frame is lowered down over the IBC tote to contain the load and mitigate risk of lateral loads resulting from sloshing fluids.

  • Vertical slings sets are suspended from weld-on excavator hooks designed for easy on easy off to switch between lifting modes.

  • Vertical sling sets with locking hooks are easy to inspect in the field and easily replaced if damaged.

  • Multiple lengths are available to easily switch between IBC lifting and Pallet lifting.

  • Weld-on excavator hooks are facing inward to protect the hook from damage during lifting activities in the offshore environment.

  • Integrated “green” handles for safe hand placement if a load needs to be manipulated.

  • Multiple size Cargo Nets are available to best match the various FIBC sizes on the market.

  • Rigging available in both Crosby and Van Beest options based on customer preference.

image.png
image.png
image.png

Collapsible Cargo Basket (With Cable Pick-Up Sling)

Collapsible Cargo Basket for Easy Loading

 

  • Heavy cargo can be moved into basket in collapsed position reducing potential for lifting associated injuries.

  • Inner canvas prevents smaller objects from rolling out.

  • Rounded / padded design reduces potential for

image.png

Specification:

Optional Recommendation:

  • Floor is treated steel pipe (Sch 40) frame

  • Diameter 6 feet (72”)

  • Collapsed height 1 foot

  • Working Load Limit 3500 lbs

  • 5/8” galvanised lifting cables

  • Overall height 10 feet

  • Side extension  3 feet

  • Weight 350 lbs

RPTL Push/Pull Tagline

For Hands Free Load Positioning

image.png

Standard Offer Sizes for Push/Pull Tagline: 15, 20 feet

image.png

Snag Resistant Tagline

New API RP 2D (7th ed)

New API rules call for semi-rigid, snag resistant tag lines, BPC snag resistant tag lines meet or exceed all API tag line recommendations.

image.png

PTL Standard Tagline

This product is recommended for all slung loads as plain rope tag lines have a much stronger possibility of fouling, wrapping on a railing or catching on a pinch point.

 

The Tangle Resistant tag lines are designed to resist fowling, wrapping or catching on obstruction on the deck.

 

They also have a better gripping surface than a regular rope and will last much longer.

 

These ropes are horizontally wrapped and then dipped in polyurethane to protect from wear and UV degradation

​

Standard Offer Tagline: 15, 20, 25 & 30 Feet

image.png
image.png

Billy Pugh Push/Pull Tag Line is designed specifically to meet the challenges associated with positioning loads while observing a “Hands-Free” policy. 

 

Billy Pugh Push/Pull Tagline incorporated a 4 ft. rigid section into our already durable tagline that is sturdy enough to push the load to a preferred location but flexible enough to bend. 

​

Standard Offer Sizes  For Push/Pull Tagline: 15, 20 Feet

RPTL Push/Pull Tagline

image.png

Vertical Lifting Clamp

IPU10 Series

(Universal - for lifting in any direction)

IPU10

image.png

IPU10S

Available in a variety of styles:

  • IPU10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB).

  • IPU10J - Larger jaw opening.

  • IPU10S - For use with stainless steel material.

  • IPU10H - For use with materials with a surface hardness to 472HV10 (450 HB).

  • Available in capacities of 0.5 thru 30 metric tons .

  • Wide variety of jaw openings available: 0” to 6.13”.

  • Full 180° turning range for material transfer, turning or moving.

  • All sizes are RFID equipped.

IP10 Series

(For vertical lifting, turning and transfer)

image.png

IP10

image.png

Available in a variety of styles:

  • IP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB).

  • IP10J - Larger jaw opening.

  • IP10S - For use with stainless steel material.

  • IP10H - For use with materials with a surface hardness to 472HV10 (450 HB).

  • Available in capacities of 0.5 thru 30 metric tons.

  • Wide variety of jaw openings available: 0” to 6.13”.

  • Full 180° turning range for material transfer, turning or moving.

  • All sizes are RFID equipped.

IP10S

IPNM Series

(For vertical lifting, turning and transfer of Non-Marring material)

image.png

IPNM10N

image.png

Available in a variety of styles:

  • IPNM10N - Standard clamp for materials such as aluminum, stainless steel, painted materials, aircraft skins, composite material, glass, plastic, etc

  • IPNM10P - With protection cap

  • IPNM10NJ - With larger jaw opening

  • Without marring the surface of the material.

  • Available in capacities of 0.5, 1 and 2 metric tons.

  • Wide variety of jaw openings available: 0” to 1.56”.

  • Full 180° turning range for material transfer, turning or moving.

  • All sizes are RFID equipped.

IPNM10P

IPU10A

(Universal - for lifting in any direction)

image.png

IPU10A automatically clicks onto the material as soon as the clamp is placed on the plate. The fact that the safety lock remains in position as the clamp closes precludes hazardous situations. Fastening the IPU10A clamp in places that are difficult to reach is no problem.

  • Available in capacities of 1, 2 and 6 metric tons.

  • Jaw openings available: 0” to 2”.

  • Full 180° turning range for material transfer, turning or moving.

  • All sizes are RFID equipped.

IPU10A

Horizontal Lifting Clamps

IPH10 Series

(For Horizontal Lift and Transfer with Pretension System)

image.png

IPH10

image.png

IPHNM10

Available in a variety of styles:

  • IPH10 - With Spring Loaded Tension, Magnets and Handle.

  • IPH10J – With larger jaw opening.

  • IPHNM10 – Non-Marring Model

  • Available in capacities of 0.5 thru 12 metric tons .

  • Wide variety of jaw openings available: 0” to 4.75”.

  • Horizontal lifting and transfer of non-sagging material.

  • All sizes are RFID equipped.

IPH10 Series
(For Horizontal Lift and Transfer)

image.png

IPH10E

Available in a variety of styles:

  • IPH10E – Standard Horizontal Lift and Transfer Clamp

  • IPH10JE - With larger jaw opening.

  • Available in capacities of 2.0 thru 25 metric tons .

  • Wide variety of jaw openings available: 0” to 4.75”.

  • Horizontal lifting and transfer of non-sagging material / bundles of non-sagging material

  • All sizes are RFID equipped.

IPHOZ Series
(For Horizontal Lift and Transfer of Thin Sheet / Materials that will Sag or Bend)

image.png

IPHOZ

IPHOZ horizontal lifting clamp is to be used for lifting and transferring, in the horizontal position, of thin sheet and other materials that will sag or bend when lifted.

  • Available in capacities of 0.75 through 15 metric tons

  • Wide variety of jaw openings available: 0” to 2.38”.

  • Lifting and transferring, in the horizontal position, of thin sheet and other materials that will sag or bend when lifted.

  • All sizes are RFID equipped.

IPPE10 Series
(For Lifting and Transporting Non-Bendable Sheet Metal in a Horizontal Position.)

image.png
image.png

Available in a variety of styles:

  • IPPE10B: Magnets in foot plate (also applies for D and H Type).

  • IPPE10BE: Economic version (also applies for D and H-Type).

  • IPPE10BNM: Non-marring (also applies for D and H-Type).

Also Available in :

  • D-Type (maximum jaw opening of 11.75”)

  • H-Type (maximum jaw opening of 16.50”)

IPPE10B(E)

IPPE10BNM

  • Available in capacities of 3 through 12 metric tons.

  • Wide variety of jaw openings available: 0” to 7.13”.

  • The jaw opening can be easily adjusted for the height of the bundle or plate.

  • All sizes are RFID equipped.

IPBC & IPHGUZ Series

(For Horizontal Transfer - with Pretension System)

image.png
image.png

IPBC

IPHGUZ

Available in a variety of styles:

  • IPBC: with Pretension System

  • IPHGZ: Fixed Hoisting Eye

  • IPHGUZ: Universal Lifting Eye

  • Available in capacities of 1 through 4.5 metric tons.

  • Wide variety of jaw openings available: 0” to 1.56”.

  • Horizontal lifting and transfer of sagging and non-sagging material.

  • May also be used for turning beams from the “H” into the “I” position.

  • All sizes are RFID equipped.

Beam Clamp

IPBK10 Beam Clamp
(For the transfer and stacking of steel beams)

image.png

  • IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical.

  • This series of clamps can be used in vertical and horizontal moving, transferring and stacking of different types of structural designs, such as H-Beams, angles, etc, depending on the application desired.

  • Available in capacities of 0.5 through 4 metric tons.

  • Jaw openings available: 0.2 to 1.13”.

  • All sizes are RFID equipped.

IPBK10

IPVUZ Series Beam Clamp
(For the transfer and stacking of steel beams)

image.png

IPVUZ

Available in a variety of styles:

  • IPVUZ: Universal Hoisting Eye

  • IPVZ: Fixed Hoisting Eye

  • Available in capacities of 0.75 through 1.5 metric tons.

  • Jaw openings available: 0 to 0.81”.

  • Vertical lift and transfer of angle iron and other loads that have only a small gripping area for the clamp (“U” has universal hoisting eye)

  • Used in vertical and horizontal moving, transferring and stacking of different types of structural designs, such as H-beams, angles, etc, depending on the application desired.

  • All sizes are RFID equipped.

IPBHZ Beam Clamp
(For the lifting and transfer of steel beams)

image.png

  • IPBHZ beam clamp is used for lifting, transferring and stacking H-Beams. An ring-center hoist eye allows for the beam flange to remain vertical.

  • This series of clamps can be used in vertical and horizontal moving, transferring and stacking of different types of structural designs, such as H-Beams, angles, etc, depending on the application desired.

  • Available in capacities of .75 through 12 metric tons

  • Wide variety of jaw openings available: 0 to 1.56”.

  • All sizes are RFID equipped.

IPBHZ

IPBSNZ Series Beam Clamp
(For the lifting and transfer of steel beams)

image.png

  • IPBSNZ beam clamp is used for lifting, transferring and stacking H-Beams. An ring-center hoist eye allows for the beam flange to remain vertical.

  • This series of clamps can be used in vertical and horizontal moving, transferring and stacking of different types of structural designs, such as H-Beams, angles, etc, depending on the application desired.

  • Available in capacities of 1.5 through 4.5 metric tons

  • Wide variety of jaw openings available: 0 to 2.00”.

  • All sizes are RFID equipped.

IPBSNZ

IPTK Series

(For transferring steel beams and attaching tackle eye)

image.png

IPTK

image.png

IPTKW

Available in a variety of styles:

  • IPTK: with hoisting eye

  • IPTKW: without hoisting eye

  • Available in capacities of 1 through 4.5 metric tons.

  • Wide variety of jaw openings available: 0” to 1.56”.

  • Horizontal lifting and transfer of sagging and non-sagging material.

  • May also be used for turning beams from the “H” into the “I” position.

  • All sizes are RFID equipped.

IPTK Series
(For transferring steel beams and attaching tackle eye)

image.png

IPTKU

image.png

IPTKUM

Available in a variety of styles:

  • IPTKU: with improved hinged hoisting eye

  • IPTKUD: with optional double locking device

  • IPTKUM: Suitable as anchor device for personnel fall arrest equipment

  • Available in capacities of 2 through 25 metric tons

  • Wide variety of jaw openings available: 2.95” to 40.16”.

  • Suitable for use as a temporary tackle eye for a beam

  • All sizes are RFID equipped.

IPTKA
(Universal Beam Clamp)

image.png

IPBSNZ

  • Multi-purpose hoisting eye to be used for tightening as well as for hoisting.

  • Maintains full WLL at angles up to 90°.

  • Bail swivels 360° and pivots 180°.

  • Easy to close and open with a hinged body with self-locking device.

  • Easy to handle with handgrips.

  • No interference or space limitations when tightening the clamp.

  • Light weight design.

  • Available in capacities of 3 through 15 metric tons

  • Wide variety of jaw openings available: 3.9” to 16”.

  • All sizes are RFID equipped.

IPBCF / IPBCNS Series Beam Clamp
(For the lifting and transfer of wide flange beam sections and plate girders)

image.png

IPBCF / IPBCNS

  • IPBCNS clamps have a recessed base to accept studs welded to the beam surface.

  • Eliminates the need for slings, chokers, and spreader bars.

  • When applied to load, the tongs automatically open and slide under the flange of the beam.

  • Center plate and gripping tongs work together - the heavier the beam, the greater the clamping pressure.

  • Available in capacities of 4.5 through 32 metric tons

  • Flange grip range: 4” to 36” (width) & 0.5” to 4” (thickness)

  • All sizes are RFID equipped.

Positioning Clamp

IPSC10
(For positioning, pulling and turning plates or fabrications)

image.png

  • Suitable for use in positioning & turning steel plates and sections.

  • Not to be used as a lifting clamp.

  • Suitable for steel with a surface hardness up to 30 Rc.

  • Available in capacities of 1.5 through 3 metric tons

  • Wide variety of jaw openings available: 0” to 2.38”.

  • All sizes are RFID equipped.

IPSC10

Shipbuilding Clamp

IPBTO10
(For positioning, pulling and turning plates or fabrications)

IPBTO10

image.png

  • IPSC10 screw style clamp is use as a temporary tackle eye in spaces that have been reinforced with HP (bulb) profiles such as engine rooms and shipsections.

  • Available in capacities of 1.5 through 6 metric tons

  • Wide variety of jaw openings available: HP 6.5” to HP 17”.

  • Profile: Holland Bulb (HP) style and size material.

  • All sizes are RFID equipped.

IPBUZ

(For positioning, pulling and turning plates or fabrications)

image.png
image.png

IPBUZ

IPBUUZ

Available in a variety of styles:

  • IPBUZ shipbuilding clamps are used for lifting, transferring and placing bulb profiles onto ship’s hulls perpendicularly.

  • These clamps are fitted with a locking device for both open and closed positions, which ensures complete reliability.

  • They are to be used exclusively for bulb profiles (not for plates).

  • IPBUZ: with Fixed Hoisting Eye

  • IPBUUZ: with Universal Hoisting Eye

  • Available in capacities of 0.75 through 3.75 metric tons

  • Jaw openings available: HP 4.75” to HP 17”.

  • Profile: Holland Bulb (HP) style and size material.

  • All sizes are RFID equipped.

IPBUZ
(For Lifting, Transferring and Placing Complete Shipsections)

image.png

IPSBUUZ

  • The IPSBU(U)Z shipbuilding clamps are used for the lifting, transfer and placing of complete shipsections.

  • These clamps are fitted with a locking device for both open and closed positions, which ensures complete reliability.

  • They are to be used exclusively for bulb profiles (not for plates).

  • IPSBUZ / IPSBUSZ: With Fixed Hoisting Eye.

  • IPSBUUZ / IPSBUSUZ: With Universal Hoisting Eye.

  • Available in capacities of 4.5 through 22.50 metric tons

  • Jaw openings available: HP 4” to HP 17”.

  • Profile: Holland Bulb (HP) style and size material.

  • All sizes are RFID equipped.

Drum Clamp

IPDV
(Designed to lift, move and transfer 50-55 gallon drums with steel tops)

image.png
image.png

IPDV

IPVK

  • IPDV drum clamp is for vertical lift and transfer. Allows drum to remain in an upright position during the lift and transfer using one clamp.

  • IPDV Jaw openings: 11.75”

  • IPVK drum clamp is for vertical lift and transfer. Automatically locks on drum, and can be used alone or in pairs.

  • IPVK Jaw openings: 0.63”

  • Available in capacities of 0.5 metric tons

  • All sizes are RFID equipped.

Concrete Clamp

IPCC
(For Lifting and Transferring Concrete Pipe Sections and Wells)

image.png

IPCC

  • IPCC is suitable for the vertical lifting and transfer of concrete pipe sections and wells.

  • Very easy application and removal of the clamp thanks to the built-in carrying-grips.

  • Normally used in combination with 7mm chain (not supplied). These clamps must be used in pairs or more.

  • Available in capacities of 1 metric tons

  • Jaw opening available: 1.56” - 5.50”.

  • All sizes are RFID equipped.

IPBG
(Provides a fast and efficient method for handling road barriers.)

image.png

  • IPBG Comes equipped with polyurethane pads.

  • Hands-free operation.

  • Welded alloy steel construction for strength and smaller size.

  • Available in capacities of 4 metric tons

  • Jaw opening available: 6” - 12”.

  • All sizes are RFID equipped.

IPBG

Speedbinder

EFFICIENT & ERGONOMIC LOAD SECUREMENT TECHNOLOGY

Speed binders is changing the load binder industry with its patented Torque Drive technology. Our line of products provide considerable time saving benefits for drivers as well as enhanced benefits by eliminating repetitive, straining operations.

TD-66 (Blue Marking)

image.png
image.png

TD-92 (Red Marking)

image.png
image.png

TD-13 (Green Marking)

image.png
image.png

Load Binder

Standard Lever Type Load Binders (LEBUS L-150)

Snubbing Load Binders (LEBUS L-150)

Walking Load Binders (LEBUS A-1W)

Standard Ratchet Type Load Binders (LEBUS L-140)

Binder without Links and Hooks (LEBUS R-10)

image.png
image.png
image.png
image.png
image.png

  • Forged steel – Quenched & Tempered.

  • Meets or exceeds requirements of US DOT FMCSA Part 393 Subpart I.

  • Upgraded for use with Grades 70, 80 and 100 Chain

  • New design one piece forged handle.

  • Continuous take-up feature provides finite adjustment to tie down load.

  • One piece assembly, no bolts or nuts to   loosen.

  • Meets or exceeds requirements of US DOT FMCSA Part 393   Subpart I.

  • Matches the Working Load Limit of Grade 100 chain except for   5/8" size.

Barrel Hooks

image.png

Description:

  • Forged carbon steel, Quenched & Tempered.

  • Meets the performance requirements of Federal Specification RR-C-271G, Type V, Class 6, except for those provisions required of the contractor.

IPDV

Other Brands

Rigid Cargo Basket

image.png

Cargo Net

Cargo Net are Manufactured from 100% High Tenacity Polyester Straps.

image.png

Polyester Cargo Nets are available in Capacities from 1T to 6T, with Mesh Sizes Commonly Ranging from 4″ to 8″. Custom Sizes, Lengths, and Designs are Available Upon Request.

​

Specifications:

  • 1 ft Reinforced Eyes on All Four Corners

  • Mesh Size options: 4in x 4in, 6in x 6in, 8in x 8in

  • 2-Ply Border

  • Fittings on Four Corners (Available on Request)

image.png

Additional Information:

  • PVC label with Serial Number, Manufacture Date, Length, WLL, and Lifting Mode Information.

  • Strictly for Static and Balanced Lifts.

  • Not suitable for cubic loads with edges and corners.

  • Maximum Load Test: 1.5 times the WLL (Customer Bears Testing Costs).

  • Manufacturer shall not be Responsible for Any Damages from Customer-Conducted Tests

Crane & Equipment

Crane Hydraulic

Operating Environment

Safe Crew Transfer

Cargo Handling

Wire Rope Rigging

Chain Rigging

Synthetic Rigging

bottom of page